Boa Coil™ Expansion Anchors
Description/Advantages
The Boa™ Coil is a high per formance expansion anchor providing through fixture fastening and easy removal to keep the job moving. It’s reusable with the coil replacement anchors making this anchor a low cost solution.
Ideal combination of value, performance and reusability make the Boa Coil the choice for Forming and tilt-wall contractors.
- Easy installation
- Removable
- Reusable
- High shear strength
Applications
Concrete formwork
Load bearing angles, beams and columns
Machinery holddown
Jersey barrier
Glare screens
Light rail/commuter work
.jpg)
NOTE: To achieve maximum loads the installation process needs to be carried out as follows:
 |
1. Using the fixture as a template, drill the correct diameter and depth hole. |
 |
2. Remove debris with vacuum or hand pump. |
 |
3. Insert the assembled Boa Coil anchor. (The coil anchor tab points up the anchor.) Tap anchor down to depth set mark and stop. |
 |
4. Tighten until washer is firmly held to the fixture and stop. Number of turns to set anchor: 1/2" 3-4 turns, 5/8" and 3/4" 4-5 turns. Ensure washer is tight and snug fit. |
 |
5. The Boa Coil anchor is ready to take load. (The bolt can be removed leaving the coil in the hole.) |
The Boa coil anchor can be reused up to 3 times in new holes.