Triga Z Heavy Duty Anchors
Description/Advantages
The Triga Z is a torque controlled range of expansion anchors boasting independently approved specifications.
With the vast choice of diameter and head style, Triga Z is the specifiers solution for cracked and non cracked concrete. Available in BZP and stainless finishes.
- Quick and easy through fixing
- Simple bolt action expansion
- Resistant to high loads (especially suitable to dynamic loads)
- Z shape collapse system: Z shape shear during tightening ensures a good pressure between the part to be fixed and the concrete
- Clamps down part to be fixed
- Performance can be improved by deeper embedment
- Full steel anchor
- Can be used with cracked or non-cracked concrete, ETA approved
- Bolt and threaded rod: 8.8 quality steel for high performance
Applications
Structural beams and columns
Lift guide rails, overhead crane rails
Machine Machinery and heavy plant hold down
| 1. Drill the correct diameter hole to the required depth. Drilling to be performed in one single operation. |
| 2. Remove debris from hole by blowing out with compressed air or hand held blow out pump. |
| 3. Insert anchor into the hole and drive it home with a hammer if necessary. Ensure expander is not pre-expanded before insertion. Ensure anchor is inserted to achieve minimum anchorage depth (hef) as stated in the Anchor Design and Specification Manual. |
| 4. If the fixing needs further tightening, the Z shape collapsible system will shear allowing further torque. |
