EPCON A7 (Discontinued and Replaced by EPCON A7+)


Fast Dispensing, Fast Curing Acrylic Adhesive

The acrylic resin and hardening agent are completely mixed as they are simultaneously dispensed from the dual cartridge through a static mixing nozzle, directly into the anchor hole. A7 can be used with threaded rod or rebar (for fastening to hollow base materials, see pages RH 31 and RH 34).

  • All weather formula
  • No drip, no sag, easy clean up
  • Fast & easy dispensing, even 28 ounce cartridge can be hand dispensed
  • Fast curing time, 35 minutes at 16°
  • Not mix ratio sensitive
  • NSF 61 approved
  • Rods are easier to insert into the hole with
  • A7 compared with other adhesives
  • Works in damp holes and underwater applications
  • Requires less adhesive—can be used in 1/16" oversized or 1/8" oversized holes
  • One formula for both hollow and solid base materials
  • Oversized holes and/or Cored-drilled holes will reduce loads; for best performance under these conditions, use C6+ or G5


Stadium Seating

Roadway Doweling

Scaffolding Attachment

Your Rating:
Your Review:




ICC Evaluation Service, Inc. – #ER-5560

Miami-Dade County – #06-0425.02

City of Los Angeles – RR#25379

DOT Approvals

Florida Building Code

NSF Standard 61 Certified for Drinking Water Components